How to Connect Roku Remote to TV

How to Connect Roku Remote to TV [Step-by-Step Guide for All Models]

Before starting the pairing process, first check the compatibility of the Roku remote with your TV to avoid sync failures. If you have a simple infrared remote, you can simply connect to the TV by inserting the new batteries into it. 

On the other hand, if you have an enhanced remote, you need to pair it manually. After doing so, the LED flash will confirm the connection. In addition, users can effortlessly pair their Roku remote to the TV without the previous one. They just need to connect to the same network, which is synced with the Roku app. 

In this comprehensive tutorial, we will discuss three primary methods for connecting the Roku remote to a TV.  

Understanding Roku Remotes

A Roku remote is a device that lets users manage their Roku TVs and their streaming devices. Moreover, the Roku remote offers several key aspects that everyone should know about.  

Roku Remote Features: 

  • The Roku Remote can effortlessly operate with its streamers, TV sets, and audio devices.
  • On more advanced Roku models (like the Roku Voice Remote Pro), a headphone jack is available to people who want to enjoy listening to something privately.
  • When using it, users can simply stream anything they desire since there are buttons on many remotes, such as Netflix. 
  • It lets you search for the targeted content and manage the device through voice commands. 

Different Types of Roku Remotes 

You can check out multiple types of Roku remotes, which are explained in the section below.

  • Simple Infrared Remote: The simple remotes have to receive the signal properly. Otherwise, they would not operate. Roku players can easily be connected through the Infrared Remote (IR), including Roku Smart Soundbar, Streambar, and Streambar Pro. However, users cannot connect it to any model of Streaming Stick, such as Roku Streaming Stick 4K, Roku Streaming Stick, and Roku Streaming Stick 4K+.
  • Enhanced Remote: This remote is also known as the Point Anywhere remote. As a result, it uses radio energy and frequency to deliver commands to the player. It is compatible with all Roku models except the older ones. Additionally, it consists of two customizable shortcut buttons, a headphone jack for solo listening, and a rechargeable battery.  
  • Voice Remote: This is similar to the enhanced remote. However, there’s a minor difference; it uses AA batteries and a wireless connection.  
  • Voice Remote Pro:  It’s the upgraded version of Voice Remote, which adds the main feature, remote finder. When you use the remote finder, your remote will play the tune. Then you can effortlessly search for the remote via a voice command. 

Preparation Before Pairing

The below section will detail each remote’s preparation before pairing. First, we will discuss the simple or standard remote. After that, we will move towards the enhanced remote. 

#1. For Simple or Standard Remote

How it Works: This standard remote basically uses invisible infrared so that it can transmit the signal from a minimal distance to your desired device. When you use it, you should keep the remote in front of your Roku device so that there will be no signal breakdown. 

How It Sets Up: To set up, you need to add new matching batteries to the remote and place the remote in front of the device. 

#2. For Enhanced Remote

How it Works: Unlike a standard remote, users don’t need to place the remote in front of the Roku device. They can easily install their streaming device behind the wall-mounted TV. 

How It Sets Up: When configuring your voice remote, your streaming device works with a pairing process to identify the new remote and establish a direct wireless connection. If your voice remote was included with your Roku device, you probably completed the pairing during initial setup and activation. If you updated a voice remote later, you likely completed pairing through the Settings menu.

How to Connect Roku Remote to TV? 

Go through the following approaches that will guide you to pair your Roku remote. 

Method 1: How To Pair Roku Remote Without Pairing Button

If a user has a simple infrared remote, he/she doesn’t need to manually connect it. First, understand the following points; after that, you can perform them on your own. 

  • Put new batteries in your simple infrared remote. 
  • Place your remote in front of your targeted Roku device. 

Note: No distractions should exist.

  • Allow your Roku player to be enabled, and wait several minutes to restart.
  • Press any button on your remote to ensure that it is working.

Make sure your device is in the proper signal area. If your device is still not working, insert the other new batteries.   

When to Use:

  • Lacks the pairing option. 
  • Needs fresh batteries to insert into the remote. 

Pros: 

  • Works with any Roku device that supports an IR remote. 
  • No technical knowledge required

Cons: 

  • A little bit time-consuming. 

Method 2: Connect an Enhanced Remote (With Pairing Button)​

If your Roku remote is an enhanced model, sync it manually through the pairing button. 

  • After opening your Roku TV, wait for a while till the blank screen starts streaming. 
  • Add the newest or freshest batteries to the Enhanced remote.
  • Look up the pairing button in the battery compartment. 
  • Then, you simply press the pairing button and wait until the LED light starts flashing after 5 seconds.
  • See whether your remote is paired or not.

After pairing, you can use your enhanced remote. 

When to Use:

  • Must have a pairing option. 
  • Uses Bluetooth or radio frequency.  

Pros: 

  • Usually offers volume control and voice search features.  
  • Works through walls and cabinets

Cons: 

  • It is a complex procedure. 
  • Must have a proper internet connection; otherwise, the network may lose. 

Method 3: Connect Roku Remote To TV Without Old Remote​

Sometimes, users lose their previous remote and are required to pair it with a new one. So, if you’re one, read the following steps. 

  • Open your Roku app on iOS or Android.
  • Move towards the Roku menu.
  • Navigate to Settings.
  • Choose Remotes & Devices.
  • Click Pair New Remote.
  • Just follow all the steps that are mentioned on your screen to connect with a new remote.

This approach works best for Wi-Fi (enhanced) remotes. 

When to Use:

  • Your mobile phone should be on the same Wi-Fi connection as your Roku device.
  • You’ve changed the location of the physical remote completely.  

Pros: 

  • No requirement for a physical remote. 
  • Automatically updates and never requires new batteries. 

Cons: 

  • Needs a mobile phone and a strong Wi-Fi connection. 

Troubleshooting Roku Remote Pairing

If you are one of those whose remote is not working well, you can follow these troubleshooting techniques.

1. Restart the Roku Device​

  • Unplug the Roku television or device from the power supply.
  • After 30 secs and plugged it back in.
  • Then, simply attempt to reconnect your remote again.

2. Repair your Remote Manually ​

  • Pull out the batteries from your remote.
  • Unplug your Roku device.
  • Wait 30 seconds; after that, you replug it.
  • Add the batteries back into your remote.
  • Hold down the pairing button for only 5 seconds.

3. Check for Interference (Simple Infrared Remote Only)​

  • Make sure there are no objects that are blocking the signal between your remote and the desired Roku device.
  • Change the Roku device’s location.  

4. Try Different Batteries​

Ensure you are not using any weak or old batteries. That’s why your remote is not connected properly. 

5. Reset the Roku Remote​

If all methods fail, try resetting the remote:

  • Pull out the batteries from the remote.
  • Hold down the pairing button for only 10 seconds until reinserting the batteries.
  • Try connecting it again.

4 Common Mistakes You Should Avoid 

Here, we will discuss common mistakes that users usually make while connecting their Roku remote to the TV. 

  1. Battery Management: Use rechargeable and updated batteries to avoid any battery issues. 
  2. Reset the Remote: Remove the batteries from the Roku remote and reset them.
  3. Clean Remote: Clean your Roku remote with a dry cloth that is slightly wet (not overly wet).
  4. Update software on Roku: Visit the Settings section in the Roku device and check the option to update software; check whether software is pending update or not.

Frequently Asked Questions

Do you have questions concerning connecting your Roku remote to the television? Read the additional questions below to clear all your queries. 

Q 1. How to pair a Roku remote without a pairing button?

Ans. Opt for the Home and Back buttons together to switch off the Roku remote when you don’t have a pairing button. Or, you may easily use your Roku mobile app. But make sure the Roku remote is highly compatible with the TV. 

Q 2. How to pair a Roku remote to a new TV?

Ans. Understand these steps to connect the Roku remote to your new TV. 

  • Go to the Settings on your favorite Roku device. 
  • Choose Remotes & Devices.
  • Pick Remote. 
  • Select Set up remote for TV control. 
  • Use the commands on the screen to pair your Roku remote to the new TV. 

Q 3. Can I pair a Roku remote to any TV?

Ans. No! TV can’t be synchronized with the Roku remote. Users are required to use Roku devices to pair their Roku remotes. 

The End Verdict! 

Pairing the Roku remote with the TV is not as challenging as it seems to be. First, find out which remote you have. Then, you can examine its compatibility to check whether your Roku remote will work on your TV or not. Besides, to pair the Roku remote with the TV, choose the pairing button. The Home and Back buttons can also be pressed at the same time (without the pairing option). Or, you can simply place the remote in front of the TV; that may also be enough for older models.